When To Use A Pump Construction sites are not always easily accessible. They often have have uneven surfaces with lots of objects strewn around, making accessibility difficult for a concrete truck. If our truck cannot gain close proximity to your point of concrete pour, then a concrete pump is required for your delivery. We have […]
When To Use A Pump Read More »
No fines concrete is generally applied when strength a required. It is also used when water is to be allowed to penetrate through the surface. It is commonly used behind retaining walls or is applied to surround a tree. It is also used on driveways where a lot of surfaces are not to be covered.
Paving and coloured concrete are very efficient in bringing the layered concrete to life. The colour can be incorporated into any concrete regardless of its strength. The colour used on concrete can range from being the conventional charcoal, to colours that glow. The distinctions and varieties you will find, are limitless.
Paving and Coloured Concrete Read More »
Foundations require a strong concrete density and are usually made from 20-25mpa consisting of rebar reinforcement. This reinforcement requires being poured into a trench. The dimensions of the trench are to be instructed by the engineer. Foundations are laid on sloping blocks. Sloping blocks have bricks layered upon the concrete. The house which is built
Slabs are the most common usage of concrete and come in 2 variants – waffle slabs and conventional slabs. Conventional slabs are those which have a deep excavated dug that penetrates into the ground. Waffle slabs are placed around ground level and consist of a stretched foam pad made of polystyrene. Slabs require concrete which
Spray Mixes are created for the purpose of shotcreting. Shotcreting is a process where concrete is placed through a concrete pump. Here, there is the usage of a compressed airline that joins the hose which throws the concrete. Spray mixes are usually used while constructing embankments, swim pools and retaining walls. These mixes have a
As the name implies, Blockfill / Cavity fill is applied when there is a need to fill up the blocks or double-layer a bricked wall for retaining the strength. This is also used when the engineers have designed walls that require extra support and strength. The mix used in cavity walls can range anywhere between
Block-fill / Cavity Fill Read More »
